Get a phone call before Grok Build runs a risky command.

Pushary sends Grok Build's approval requests to your phone. If you have not answered after 2 minutes, Pushary calls you. You can set Call after to 1, 2, or 3 minutes. Say no on the call and the command is blocked. Say yes and Pushary lets it through, though in Grok's default ask mode Grok can still ask at the terminal. Pushary calls numbers in the US, Canada, and Germany, and mobile numbers in Austria, Switzerland, the UK, and the Netherlands. Calls are in English, German, French, or Dutch.

Updated

What reaches your phone first. This is the push Grok Build sends through Pushary when it waits on you. The call only comes if it goes unanswered.

Call limits

  • Calls reach numbers in the US, Canada, and Germany, and mobile numbers in Austria, Switzerland, the UK, and the Netherlands.
  • Calls work for 13 agents (listed below) today.
  • Codex rings after 1 minute while "Call sooner when an agent waits less" is on, the default.
  • Gemini CLI rings after 1 minute while "Call sooner when an agent waits less" is on, the default.
  • Calls are in English, German, French, or Dutch.

Ask, wait, escalate, record

That is the whole loop. The call is step three, and it only happens when the push did not reach you.

  1. 1. Ask

    Grok Build sends its request to your phone. The push says what it wants to do and in which project, so you know which agent needs you.

  2. 2. Wait

    Grok Build waits for your answer. If nobody answers, Pushary hands the request back to Grok Build's own prompt without a yes, unless Always is in force for the matching rule (set on the rule itself or by a temporary mode), the rule's timeout action is auto-approve or auto-deny, and that timeout ends while Grok Build is still waiting. In Always-approve mode, where Grok Build would run it without asking, Pushary CLI 1.9.223 and later deny it instead, except while the Pushary Mac app handles Grok Build's hooks.

  3. 3. Escalate

    If you have not answered after 2 minutes, Pushary calls you. You can set Call after to 1, 2, or 3 minutes. Only inside your calling hours, at most 5 calls in 24 hours by default, and never once the request is answered.

  4. 4. Record

    Your answer goes back to Grok Build and into your activity record, marked "by phone call". Each call is listed on the Calls page under Call history.

What a yes means in Grok Build

Grok Build treats a hook's allow as "not blocked". It does not skip Grok's own checks. So a yes on the call lets the command past Pushary, and in the default ask mode Grok may still show its own prompt at the terminal. In Always-approve mode a yes runs it with no further prompt.

A no on the call blocks the command in every mode.

Answer neither the push nor the call, and Pushary hands the command back to Grok unanswered, unless Always is in force for the matching rule (set on the rule itself or by a temporary mode), the rule's timeout action is auto-approve or auto-deny, and that timeout ends while Grok is still waiting. In the default ask mode Grok then shows its own prompt at the terminal and waits, or, run headless with grok -p, ends the turn without running it. In Always-approve mode, where Grok would run a handed-back command without asking, Pushary CLI 1.9.223 and later deny it instead; npx -y pushary@latest upgrade installs it. Older versions hand it back, and so does the Pushary Mac app while it handles Grok's hooks, and Grok runs it, so in those cases keep Grok in the default ask mode for commands that must not run without you.

If you have not answered after 2 minutes, Pushary calls you. You can set Call after to 1, 2, or 3 minutes.

Pushary's hooks see every Grok tool call. If Grok kills the hook at its timeout or cannot run it, Grok carries on as if no hook had answered: Always-approve runs the command, and the default ask mode shows its own prompt for any command it would not run without asking, or ends the turn when run headless with grok -p. If the Pushary command or Node is missing, setup's hook refuses the call on macOS and Linux, but not on Windows. Grok's own question and plan dialogs stay in Grok.

What the call says

These lines come from the English script Pushary's calls use, with Grok Build's name filled in. Calls are in English, German, French, or Dutch.

When Grok Build waits for an approval
  1. Pushary

    Hi Sam, it's Pushary. Grok Build needs your OK in infra. It wants to run git push origin infra/redis-timeouts, and it's been waiting 2 minutes. Should it go ahead?

  2. You

    Yes, go ahead.

  3. Pushary

    Just to be sure, you want to approve this, so Grok Build will run git push origin infra/redis-timeouts?

  4. You

    Yes.

Okay, I've approved it. Grok Build may still ask you to confirm at your computer.

A call lasts up to about 180 seconds, plus 90 for each further question it asks, and ends earlier when the agent stops waiting sooner.

When it calls, and when it does not

Pushary calls only when all of this is true

  • Grok Build is waiting on a request you have not answered on your phone.
  • Call after has passed: 2 minutes, or the 1, 2, or 3 minutes you pick.
  • It is inside your calling hours: 8:00 AM to 10:00 PM in your time zone, every day, unless you pick Weekdays only. A request that comes in outside them gets its call when your calling hours start, if it is still waiting then. Grok Build waits at most about 590 seconds, so that only happens when your hours start within that time.
  • You are under your daily call limit: fewer than 5 calls in the last 24 hours by default. You can set up to 10, or no limit.
  • Your workspace has call minutes left.

It does not call when

  • The request is already answered.
  • The request stops waiting before your calling hours start. The push still arrives, but your phone does not ring.
  • Grok Build would stop waiting before the call could end.
  • Calls are off, or your number is not confirmed with a test call yet.
  • The request asks several questions at once.
  • A question Grok Build asks is too long to read out in full on a call: over 300 characters, or with an option over 100. It stays on your phone and in the Pushary app. An approval with a long command still gets its call. The call says the step is too long to read out, and you can approve it on the call once you confirm you are approving it without hearing all of it. It needs the Pushary app instead when Pushary flags it as risky, it changes a protected file, it is a kind of step Pushary always asks about, or Pushary could not see all of it.
  • You are at your Mac with the Pushary app, so the push waits there instead of going to your phone. If you leave within 3 minutes of the request, the call can follow within about 1 minute once the push reaches your phone. If you leave later, no call follows.
  • You reached your call limit for the last 24 hours, or your workspace ran out of minutes. Push notifications keep working.

Before a yes counts, Pushary asks again. It reads the step back, or, for a step too long to read out, asks whether you approve it without hearing all of it. A step that cannot be undone is called out first.

If a Pushary call to you is already running, Pushary tries again after 3 minutes, up to 3 times, while the request still waits.

Some requests can only be approved in the Pushary app. On those, the call can still say no or tell the agent what to do instead.

Miss the call too and Pushary hands the request back to Grok Build unanswered, unless Always is in force for the matching rule (set on the rule itself or by a temporary mode), the rule's timeout action is auto-approve or auto-deny, and that timeout ends while Grok Build is still waiting. In its default ask mode Grok Build then asks at the terminal, or ends the turn without running it when run headless with -p. In Always-approve mode Pushary CLI 1.9.223 and later deny it instead. Older versions hand it back, and so does the Pushary Mac app while it handles Grok Build's hooks, and Grok Build runs it.

Set up phone calls for Grok Build

Connect Grok Build once, then turn on calls on the Calls page. It takes a few minutes.

  1. 1. Connect Grok Build

    Run this on the computer where Grok Build runs. It installs Grok Build's hooks, connects Pushary and pairs your phone.

    bash
    npx -y pushary@latest setup --agents grok
  2. 2. Restart Grok Build

    Start a new grok session so it loads the hooks, the rules and the Pushary tools.

  3. 3. Open Calls

    Sign in at pushary.com and open Calls in the sidebar.

  4. 4. Your number

    Enter your number and your first name, then tap Save number. Pushary calls numbers in the US, Canada, and Germany, and mobile numbers in Austria, Switzerland, the UK, and the Netherlands.

  5. 5. Test call

    Pushary calls you once. Answer the call and confirm your number when asked.

  6. 6. Turn on

    Tick the box that lets Pushary call you with an AI voice, then tap Turn on calls.

  7. 7. When Pushary may call

    Set Call after, Calling hours, Weekdays only and Calls a day, at most, then tap Save rules.

Open Calls

Call minutes on each plan

Phone calls come with Agent, Agent Pro, and Team. The 3-day free trial includes 5 call minutes. The full monthly minutes start with your paid plan.

PlanPriceCall minutes
Agent$9.99 a month10 min a month
Agent Pro$19.99 a month20 min a month
Team$59 a month for 5 people60 min a month
  • Minutes are shared by everyone in the workspace. You can buy more on the Calls page as a one-time purchase.
  • These are web prices. The phone app's store shows its own price and trial terms.

Every way to get a phone call from Grok Build

Each row is what the product's own page or README said when we checked it. Most of these ring when the agent decides to. Pushary rings only after you miss the push.

OptionHow it reaches youWhen it ringsAnswer on the callPublished priceWhere it stops
PusharyA real phone call to your number, after a pushOnly after you miss the push: 2 minutes after the request (you pick 1, 2, or 3), and when the push waited at your Mac, within about 1 minute after it reaches your phone if you left within 3 minutes of the request. In your calling hours, at most 5 in 24 hours by defaultYes. It reads the step back, or says it is too long to read out, before a yes counts$19.99 a month on Agent Pro, with 20 call minutesNumbers in the US, Canada, and Germany, and mobile numbers in Austria, Switzerland, the UK, and the Netherlands. Calls in English, German, French, or Dutch
PaigyA CallKit call in its iPhone appWhen the agent judges it urgent, under a mode you set. LockedIn rings for every notification. A dismissed call retries after 10 minutes, 30 minutes and 2 hoursYes, by voiceFreeiPhone only. It rings its app, not a phone number
CallMeMCPA call in its iPhone or Android app, over the internetWhen the agent decides to callYes. Your spoken reply goes back as textA subscription in the app. No price on its siteAt most 10 calls an hour and 40 a day to one number
agentvoiceA real phone call to your verified numberWhen the agent decides to call. Its page says it is not a background timerYes, with a spoken CONFIRMED after a read-backFree call credits, then usage pricingNANP (+1) numbers only. 3 calls an hour and 8 a day
ntfy phone calls (paid plans)A real phone call that reads your message aloudWhenever your script sends a message with the X-Call headerNo. You can only listen, so the agent keeps waitingPaid plans include 3, 20 or 50 calls a dayOne way, English voice only
Pushover emergency priorityA push that repeats until you acknowledge itNever calls. It repeats every 30 seconds or more until acknowledged, for up to 3 hours or 50 retriesNo. Acknowledging is not approving$4.99 once per platformPush only

Where Pushary is weaker

  • Today Pushary calls numbers in the US, Canada, and Germany, and mobile numbers in Austria, Switzerland, the UK, and the Netherlands. App-based callers ring their own app, so they work in any country, and a Twilio or Telnyx setup reaches any number your account covers.
  • Pushary calls for 13 agents (listed below) today. Most call tools are MCP servers, so they work with any MCP client.
  • Paigy and Twring are free right now, agentring Pro is $12 for 100 minutes, and ntfy's paid plans cost less per call. What Pushary charges for is no setup, the push first and the call only on a miss, the limits, and the record.
  • Calls are in English, German, French, or Dutch only.

Which agents can call you

Push approvals and questions already reach your phone from every agent below. Phone calls work for the agents marked yes.

AgentOn your phone todayPhone call
Claude CodeApprovals, enforced by its hooksYes
CodexApprovals, enforced by its hooksYes
Gemini CLIApprovals, enforced by its hooksYes
Antigravity CLIApprovals, enforced by its hooksYes
Grok BuildApprovals, enforced by its hooksYes
fxQuestions, when the agent asksYes
HermesApprovals, through its Pushary pluginYes
Claude ChatQuestions, when the agent asksYes
ChatGPTQuestions, when the agent asksYes
Claude CoworkQuestions, when the agent asksYes
ClineQuestions, when the agent asksYes
LovableQuestions, when the agent asksYes
Grok BotQuestions, when the agent asksYes
Qwen CodeApprovals, enforced by its hooksNot yet
CodeBuddyApprovals, enforced by its hooksNot yet
QoderApprovals, enforced by its hooksNot yet
DroidApprovals, enforced by its hooksNot yet
Devin CLIApprovals, enforced by its hooksNot yet
WindsurfQuestions, when the agent asksNot yet
CursorApprovals, enforced by its hooksNot yet
VS CodeApprovals, enforced by its hooksNot yet
OpenCodeApprovals, enforced by its hooksNot yet

Questions about Grok Build phone calls

Can Grok Build call me before a risky command?

Not on its own. With Pushary, a Grok Build command goes to your phone first, and if you miss it Pushary calls you. Numbers in the US, Canada, and Germany, and mobile numbers in Austria, Switzerland, the UK, and the Netherlands, calls in English, German, French, or Dutch.

Why might Grok Build still ask at the terminal after I said yes on the call?

Grok treats a hook's allow as "not blocked", not as an approval of its own. In the default ask mode Grok then shows its own prompt. A no from the call always blocks.

Does Pushary change Grok Build's permission mode?

No. Setup leaves Grok's permission mode as it is. It adds hooks, the Pushary tools in ~/.grok/config.toml and a rules file.

Is the Grok Build call the same as the Grok Bot call?

No. Grok Build is the agent in your terminal, and Pushary holds its commands through hooks. Grok Bot is xAI's app, connected as a connector, and Pushary calls about the questions a Bot asks.